SynProf – FRP Profiles Glass-fibre-duct-spacing-mats
Glass-fibre-profiles connected with insulating tapes.
Glass-fibre-duct-spacing-mats are a cost effective cooling channel solutions with free selectable / adjustable distances of single profiles. Also different profile-shapes can be used in one mat.
Application
Glass-fibre-duct-spacing-mats are used in transformer and coils with cooling channels. They can be used in automated winding processes.
Standards
Insulating material class H (180 °C)
Delivery forms
Length: Up to 25 m
Width: Up to 3000 mm
Also deliverable in kits.
Base
Profiles:
- dogbone
- square
- round
Insulating tapes:
- SynTherm® YT510
- NOMEX®
- SynTherm® DMD
- SynTherm® APA
- SynTherm® NPN
- MYLAR® A
Other materials on request.
Technical data
General
| Property | Unit of measure | |
|---|---|---|
| Casting resin | Polyester / Epoxy | |
| Reinforcement | Glas-Roving | |
| Fibre content | % | > 60 |
| Specific weight | g/cm³ | > 1.85 |
| Bending strength | N/mm² | 480 |
| Bending strength E-Module | N/mm² | 35x10^3 |
| Tensile strength | N/mm² | 450 |
| Compressive strength | N/mm² | 240 |
| Dielectric constant | apprx. 4 | |
| Specific resistance | Ωxcm | 10^12 |
| CTI | KC 600 | |
| 1-Min.-voltage test | kV/mm | 8 |
| Coefficient of expansion | K-1 | 10-15^-6 |
| Water absorption | % | < 5 |
| Thermal conductivity | W/m*K | 0.3 |
| Thermal class | H (180 °C) |