SynChem – Resins & Varnishes Voltatex® 2100 Impregnating varnish

Varnish composed of polyester imide / phenolic resin.

Voltatex® 2100 is a transparent, ready-to-use and heat-curing impregnating varnish composed of polyester imide/ phenolic resin combination.

Particular features:

  • fast curing
  • hard-eleastic bonding
  • compatible with all common magnet wires

The cured varnish is resistant to:

  • solvent vapours
  • transformer oils
  • climate-related stress
  • mould infestation
  • acids, alkalines and ammonia
Download datasheet

Application

Voltatex® 2100 is applicable for:

  • insulation systems up to thermal class H, acc. IEC 60085
  • in general suitable up to thermal class E-H, depending on curing time and -temperature.
  • electric motors
  • rotors with thermal and mechanical high stress

Standards

  • Thermal class acc. IEC 216: TI 155-165
  • Type acc. E DIN IEC 60646-3-2: type 155
  • UL-temperature class: 200

Delivery forms

Voltatex® 2100 is delivered in 25 kg one-way compounds.

Base

Polyester imide / phenolic resin

Color

Transparent

Storage

The resin can be stored for up to 12 months at max. 25 °C if sealed correctly in original containers.

Hardening

  • Thermal class E: 4-6 h at 120 °C
  • Thermal class B: 4-6 h at 130 °C
  • Thermal class F-H: 6 h at 150 °C

Protection

Cured Voltatex® 2100 is biologically inactive and not dangerous to health. When processing the liquid resin, please refer to the Material Safety Data Sheet (MSDS) for Voltatex® 2100.

Cleaning

Cured Voltatex® 2100 is almost insoluble. Therefore, application equipment should be regularly cleaned with cleaner Voltatex® T050 or T060. All equipment cleaning and maintenance should be carried out in accordance with the equipment manufacturer’s instructions.

Processing

Voltatex® 2100 is delivered ready-to-use. The consistency can be lowered if necessary with Voltatex® T022.

Technical data

Mechanical
Property Unit of measure Value Test method
Bond strength of twisted coils room temperature N 250 ± 30 IEC 60455-2, test method A acc. IEC 61033
Bond strength of twisted coils 130 °C N 46 ± 4 IEC 60455-2, test method A acc. IEC 61033
Bond strength of twisted coils 155 °C N 34 ± 2 IEC 60455-2, test method A acc. IEC 61033
Bond strength of twisted coils 180 °C N 25 ± 2 IEC 60455-2, test method A acc. IEC 61033
Thermal
Property Unit of measure Condition Value Test method
Thermal class Helical Coil 200 UL 1446, ASTM D2519
Thermal class Twisted Pair 200 UL 1446, ASTM D2307
Temperature class °C based on dielectric strength 160-170 IEC 60216
Temperature index °C based on weight loss 155-165 IEC 60216
Chemical
Property Condition Value Test method
Resistance mould, test method I (28 days without add. nutrient solution) range 0 - resistant DIN IEC 68 part 2-10
Resistance temperature changes: -55 °C/+130 °C resistant Test Na acc. DIN IEC 68 part 2
Resistance dry heat: +150 °C resistant Test Bb DIN IEC 68 part 2
Resistance Coldness: -55 °C resistant Test Ab acc. DIN EC 68 part 2
Impact on enamelled wires compatible with all common enamelled wires
Electrical
Property Unit of measure Value Test method
Specific volume resistance at 23 °C Ω*cm ≥10^15 acc. IEC 60455-2, test method acc. IEC 60093
Specific volume resistance after 96 h water immersion Ω*cm ≥10^15 acc. IEC 60455-2, test method acc. IEC 60093
Dielectric strength at 23 °C and 50 % r.h. kV/mm ≥100 acc. IEC 60455-2, test method acc. IEC 60243-1
Dielectric loss factor at (AC, 23 °C, 50 Hz) ≤20x10^-3 acc. IEC 60455-2, test method acc. IEC 60250
Dielectric loss factor at 155 °C and 50 Hz ≤100x10^-3 acc. IEC 60455-2, test method acc. IEC 60250
Dielectric constant at 23 °C between 50 Hz and 1 MHz 3.0±0.5 nach IEC 60455-2, Prüfverfahren nach IEC 60250
Dielectric constant at 155 °C and 50 Hz 5.0±0.5 acc. IEC 60455-2, test method acc. IEC 60250
Loss factor cross section 0.2=200x10^-3 °C ≥170 acc. IEC 60455-12, test method acc. IEC 60250
Liquid phase
Property Unit of measure Condition Value Test method
Binder content % 48-52
Viscosity mPas at 25 °C 295-365 DIN 53019
Flow time s at 23 °C 65-95 DIN 53211