SynTape® – Electrical Adhesive Tapes
SynTape® F/ RX.50
SynTape® F/ RX.50 consists of a Nomex® paper reinforced with polyester fibres as a backing, with a rubber adhesive.
Attributes
It has good mechanical loading capacity and flexibility thanks to its additional reinforcement with polyester fibres. UL-approved to 155 °C.
Application
For electrical insulation at high thermal loads and as final insulation.
Standards
RoHS compliant according to 2002/96/EU.
Delivery forms
Width: from 2.5 mm in steps of 0.1 mm
Standard lengths: 50 m rolls
Core diameter: 76 mm (3")
Special widths: from 0.8 mm on request
Glue
Rubber
Adhesive
one-sided
Storage
Adhesive tapes should always be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Technical data
General
| Type/ Ordering information | Standard colours | Backing | Backing thickness | Adhesive | Total thickness | Tear force | Elongation at break | Adhesiveness / Adhesion to steel | Dielectric strength | Thermal class | UL FILE NO. |
| Unit of measure | |
|---|---|
| RX.50 | |
| cream | |
| Nomex® polyester reinforced | |
| mm | 0.125 |
| rubber | |
| 0.160 mm | |
| N | 80 /10 mm |
| 5 % | |
| 5.0 N/cm | |
| 2500 Veff | |
| 155 °C / F | |
| E 178 430 |
SynTape® is a registered trademark of SynFlex.
Nomex®, Kapton®, KAPTON® are registered trademarks of E.I. Du Pont de Nemours and Company.