SynTape® – Electrical Adhesive Tapes Syntape® B/ PR.30
SynTape® B/ PR.30 is a glass fibre reinforced polyester tape with rubber adhesive.
Besides a high resistance to tears, SynTape® B/ PR.30 is characterised by its high initial adhesiveness.
Application
As stress relief and mechanical reinforcement, as well as for masking the winding start and end.
Delivery forms
- Width: From 2.5 mm, in 0.1 mm increments
- Standard length: 50 m
- Core diameter: 76 mm (3“)
- Special widths on request
Glue
Rubber
Adhesive
one-sided
Storage
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
Technical data
General
| Property | Unit of measure | |
|---|---|---|
| Electrolyt. corrosion value | 1 | |
| Thermal class | 130 °C/ B | |
| Dielectic strength | kV | 5 |
| Elongation at break | % | 5 |
| Adhesiveness / Adhesion to steel | N/cm | 4.0 |
| Tensile strength | N/cm | 550 |
| Adhesive | Rubber | |
| Total thickness | mm | 0.175 |
| Backing thickness | mm | 0.100 |
| Backing | Polyester glass filament reinforced | |
| Standard colours | translucent | |
| Type/ Ordering information | B/ PR.30 |