SynTape® – Electrical Adhesive Tapes SynTape® F/ PVX.30
SynTape® F/ PVX.30 is a glass-fibre-reinforced polyester tape of thermal class F (155 °C) with acrylic adhesive.
SynTape® F/ PVX.30 has a very high resistance to tears and good resistance to impregnants.
Application
It can be used as a final bandage, for sticking down the start and end of windings, sticking supply lines and for strain releif (mechanical reinforcement).
Delivery forms
- Width: from 2.5 mm in steps of 0.1 mm
- Standard length: 66 m
- Core diameter: 76 mm (3“)
- Special widths on request
Glue
acrylate
Adhesive
one-sided
Storage
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
Technical data
General
| Property | Unit of measure | |
|---|---|---|
| Electrolyt. corrosion value | 1 | |
| Thermal class | 155 ° C/ F | |
| Dielectic strength | kV | 5 |
| Adhesiveness / Adhesion to steel | N/cm | 6.0 |
| Elongation at break | % | 4 |
| Tensile strength | N/cm | 380 |
| Total thickness | mm | 0.170 |
| Adhesive | Acrylat | |
| Backing thickness | mm | 0.110 |
| Backing | Glass fibre reinforced polyester | |
| Standard colours | translucent | |
| Type/ Ordering information | F/ PVX.30 |