SynTape® – Electrical Adhesive Tapes SynTape® F/ PX.50
SynTape® F/ PX.50 is a Nomex® polyester adhesive tape with high adhesiveness due to the rubber adhesive.
An enhanced dielectric strength is achieved via laminating the tape with a polyester film. UL approved.
Application
For electrical insulation at high thermal loads and as final insulation.
Delivery forms
- Width: From 2.5 mm, in 0.1 mm increments
- Standard length: 50 m
- Core diameter: 76 mm (3“)
- Special widths on request
Glue
Rubber
Adhesive
one-sided
Storage
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
Technical data
General
| Property | Unit of measure | |
|---|---|---|
| Type/ Ordering information | F/ PX.50 | |
| Standard colours | cream | |
| Backing | Nomex® / Polyester | |
| Backing thickness | mm | 0.090 |
| Adhesive | Rubber | |
| Thermal class | 155 ° C/ F | |
| Total thickness | mm | 0.135 |
| Tensile strength | N/cm | 65 |
| Elongation at break | % | 10 |
| Adhesiveness / Adhesion to steel | N/cm | 5.5 |
| Dielectic strength | kV | 7 |
| Electrolyt. corrosion value | 1 |