SynTape® – Electrical Adhesive Tapes SynTape® F 131/ PT.40
SynTape® F 131/ PT.40 is a UL approved polyester/ polyester nonwoven laminated adhesive tape with very good cushioning effect.
SynTape® F 131/ PT.40 is a polyester adhesive tape with acrylate adhesive and is characterised by its good ductility and resistance to tears.
Application
As final insulation or phase insulation and for masking soldering points, printed circuit board contacts as well as the winding start and end.
Standards
RoHS compliant according to 2011/65/EU.
Delivery forms
- Width: From 2.5 mm, in 0.1 mm increments
- Standard length: 50 m
- Core diameter: 76 mm (3“)
- Special widths on request
Glue
Acrylate
Adhesive
one-sided
Storage
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Technical data
General
| Property | Unit of measure | |
|---|---|---|
| Electrolyt. corrosion value | 1 | |
| Thermal class | 155 °C/ F | |
| Dielectic strength | kV | 5 |
| Adhesiveness / Adhesion to steel | N/cm | 6.0 |
| Elongation at break | % | 20 |
| Tensile strength | N/cm | 45 |
| Total thickness | mm | 0.215 |
| Adhesive | Acrylate | |
| Backing thickness | mm | 0.160 |
| Backing | Polyester/ Polyester non-woven | |
| Type/ Ordering information | F 131/ PT.40 | |
| Standard colours | translucent |