SynTape® – Electrical Adhesive Tapes 3M No. SUPER 10

3M No. Super 10 electrical insulating tape consists of a polyester film reinforced with a thermoset, flame-retardant epoxy resin coated on both sides

Elastic, robust, resistant to solder drips, high puncture resistance, good electrical properties and easy to handle.

Download datasheet

Application

As a coil cover, for cable fastening/bundling, as a cover band and for terminal and crossover insulation for transformers.

Delivery forms

  • Width: from 2.5 mm, in 0.1 mm increments
  • Standard lengths: 55 m rolls
  • Core diameter: 76 mm (3")
  • Special widths on request

Glue

Rubber

Adhesive

one-sided

Storage

Adhesive tapes should always be stored in a cool, dry place at approx. 20 °C and 50-60 % relative humidity. The storage period should not exceed 6 months.

Punched parts, bent & formed parts

We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.

 

More about punched parts

Technical data

General
Property Unit of measure
Thermal class 155 °C (F)
Flame retardant UL 510
Dielectic strength kV 8
Adhesiveness / Adhesion to steel N/cm 4.9
Elongation at break % 120
Tensile strength N/cm 79
Total thickness mm 0.127
Adhesive Rubber
Backing thickness mm 0.088
Backing Polyester film
Standard colours cream
Type/ Ordering information 3M Elektro-Isolierband Nr. Super 10