SynTape® – Electrical Adhesive Tapes SynTape® B 616/ GL.95

SynTape® B 616/ GL.95 is a UL-approved fibre glass adhesive tape with rubber adhesive.

High tear and temperature resistant fabric tape with excellent initial adhesiveness.



Download datasheet


As electrical insulation of coils and transformers, as final insulation and as coil ends of stators. It is used if high mechanical strength, stress relief and thermal resistance are required.

Delivery forms

  • Width: From 2.5 mm, in 0.1 mm increments
  • Standard length: 50 m
  • Core diameter: 76 mm (3“)
  • Special widths on request






6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.

Technical data

Property Unit of measure
Type/ Ordering information B 616/ GL.95
Standard colours white or black
Backing Glass fibre
Backing thickness mm 0.120
Adhesive Rubber
Thermal class 130 °C/ B
Total thickness mm 0.170
Tensile strength N/cm 300
Elongation at break % 5
Adhesiveness / Adhesion to steel N/cm 3.5
Electrolyt. corrosion value 1
Dielectic strength kV 2.5