SynTape® – Electrical Adhesive Tapes SynTape® B/ P.355
SynTape® B/ P.355 is a polyester adhesive tape with acrylic adhesive.
The B/ P.355 polyester adhesive tape is characterised by good mechanical resilience and good green strength.
Application
As a corer and insulation layer, final insulation, taping and insulation of coils and wires. The tape is characterised by its broad range of uses.
Delivery forms
- Width: from 2.5 mm in steps of 0.1 mm
- Standard length: 66 m
- Core diameter: 76 mm (3“)
- Special widths on request
Glue
acrylate
Adhesive
one-sided
Storage
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
More about punched parts
Technical data
General
| Property | Unit of measure | |
|---|---|---|
| Electrolyt. corrosion value | 1 | |
| Thermal class | 130 ° C/ B | |
| Dielectic strength | kV | 7 |
| Adhesiveness / Adhesion to steel | N/cm | 6.0 |
| Elongation at break | % | 100 |
| Tensile strength | N/cm | 70 |
| Total thickness | mm | 0.087 |
| Adhesive | Acrylate | |
| Backing thickness | mm | 0.050 |
| Backing | Polyester film | |
| Standard colours | Yellow and transparent | |
| Type/ Ordering information | B/ P.355 |