SynTape® – Electrical Adhesive Tapes SynTape® B/ P.40
SynTape® P.40 is a polyester adhesive tape with silicone adhesive; the standard colour is green.
SynTape® P.40 has constant good adhesiveness, can be smoothly removed from the roll and has excellent high temperature resistance.
Application
Masking of printed circuit board contacts when soldering with subsequent residue-free removal.
Delivery forms
- Width: From 2.5 mm, in 0.1 mm increments
- Standard length: 50 m
- Core diameter: 76 mm (3“)
- Special widths on request
Glue
Silicone
Adhesive
one-sided
Storage
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
More about punched parts
Technical data
General
Property | Unit of measure | |
---|---|---|
Type/ Ordering information | P.40 | |
Standard colours | green | |
Backing | Polyester film | |
Backing thickness | mm | 0.023 |
Adhesive | silicone | |
Thermal class | 130 °C/ B | |
Total thickness | mm | 0.060 |
Tensile strength | N/cm | 40 |
Elongation at break | % | 80 |
Adhesiveness / Adhesion to steel | N/cm | 2.5 |
Dielectic strength | kV | 4.5 |
Electrolyt. corrosion value | 1 |