SynTape® – Electrical Adhesive Tapes SynTape® B/ PT.25
SynTape® B/ PT.25 is a polyester/ polyester non-woven laminated adhesive tape with very good cushioning effect and a thermosetting rubber adhesive.
These tapes are characterised by their good ductility and resistance to tears.
Particularly suitable as final insulation or phase insulation for difficult surfaces, for masking soldering points and the winding start and end. Partly UL approved.
RoHS compliant according to 2011/65/EU.
- Width: From 2.5 mm, in 0.1 mm increments
- Standard length: 50 m
- Core diameter: 76 mm (3“)
- Special widths on request
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
|Property||Unit of measure|
|Type/ Ordering information||B/ PT.25|
|Backing (Laminate)||Polyester/ Polyester non-woven|
|Thermal class||130 °C/ B|
|Elongation at break||%||45|
|Adhesiveness / Adhesion to steel||N/cm||5.0|
|Electrolyt. corrosion value||1|