SynTape® – Electrical Adhesive Tapes SynTape® B/ PT.45
SynTape® B/ PT.45 is a polyester/ polyester non-woven laminated adhesive tape with very good cushioning effect and a thermosetting rubber adhesive.
These tapes are characterised by their good ductility and resistance to tears.
Application
Particularly suitable as final insulation or phase insulation for difficult surfaces, for masking soldering points and the winding start and end. Partly UL approved.
Delivery forms
- Width: From 2.5 mm, in 0.1 mm increments
- Standard length: 50 m
- Core diameter: 76 mm (3“)
- Special widths on request
Glue
Rubber
Adhesive
one-sided
Storage
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
More about punched parts
Technical data
Property | Unit of measure | |
---|---|---|
Type/ Ordering information | B/ PT.45 | |
Standard colours | white | |
Backing (Laminate) | Polyester / Polyester non-woven | |
Backing thickness | mm | 0.180 |
Adhesive | Rubber | |
Thermal class | 130 °C/ B | |
Electrolyt. corrosion value | 1 | |
Dielectic strength | kV | 5 |
Adhesiveness / Adhesion to steel | N/cm | 6.5 |
Elongation at break | % | 20 |
Tensile strength | N/cm | 45 |
Total thickness | mm | 0.235 |