SynTape® – Electrical Adhesive Tapes SynTape® H/ H.50

SynTape® H/ H.50 is a UL approved Kapton® adhesive tape with silicone adhesive for the highest electrical and thermal demands.

Constant, good adhesiveness over a large temperature range, high dielectric strength and smooth removal from the roll. Flame retardant according to UL 510.


Download datasheet


Masking of printed circuit board contacts when soldering with subsequent residue-free removal.

Delivery forms

  • Width: From 2.5 mm, in 0.1 mm increments
  • Standard length: 66 m
  • Core diameter: 76 mm (3“)
  • Special widths on request






6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.

Technical data

Property Unit of measure
Type/ Ordering information H/ H.50
Standard colours brown-transparent
Backing Kapton®
Backing thickness mm 0.050
Adhesive Silicone
Thermal class 180 ° C/ H
Flame retardant UL 510
Electrolyt. corrosion value 1
Dielectic strength kV 10
Adhesiveness / Adhesion to steel N/cm 2.5
Elongation at break % 35
Tensile strength N/cm 75
Total thickness mm 0.085