SynTape® – Electrical Adhesive Tapes SynTape® TFE.130
SynTape® TFE.130 is a grey PTFE adhesive tape with silicone adhesive. The backing thickness is 0.13 mm.
The tape TFE.130, with extremely high short-term thermal resistance of up to 260 °C, has excellent gliding properties, provides long service life and good mechanical load capacity, is flame retardant according to UL 510 and listed with flammability of UL 94V0.
Application
When high temperatures, high ageing resistance, good sliding properties and good mechanical load capacity are required. It is often used for the insulation of high-frequency parts.
Delivery forms
- Width: From 2.5 mm, in 0.1 mm increments
- Standard length: 50 m
- Core diameter: 76 mm (3“)
- Special widths on request
Glue
Silicone
Adhesive
one-sided
Storage
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
More about punched parts
Technical data
| Property | Unit of measure | |
|---|---|---|
| Temperature range | up to +260°C | |
| Dielectic strength | kV | 11.5 |
| Thermal class | 180 °C/ H | |
| Tensile strength | N/cm | 80 |
| Elongation at break | % | 320 |
| Adhesiveness / Adhesion to steel | N/cm | 3.5 |
| Total thickness | mm | 0.190 |
| Adhesive | Silicone | |
| Backing thickness | mm | 0.130 |
| Backing | PTFE film | |
| Standard colours | grey | |
| Type/ Ordering information | TFE.130 |