SynTape® – Electrical Adhesive Tapes SynTape® H/ 301
SynTape® H/ 301 is a polyimide adhesive tape with silicone adhesive for the highest electrical and thermal demands.
SynTape® H/ 301 has good adhesiveness over a large temperature range, high dielectric strength and smooth removal from the roll.
SynTape® H/ 301 is used for masking of printed circuit board contacts when soldering with subsequent residue-free removal.
RoHS-compliant acc. to 2011/65/EC
- Width: from 2.5 mm, in 0.1 mm increments
- Standard length: 33 m
- Core diameter: 76 mm (3'')
- Special widths on request.
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
|Property||Unit of measure|
|Type/ Ordering information||301|
|Total thickness||mm||0.060 ± 0.005|
|Backing thickness||mm||0.030 ± 0.003|
|Coefficient of expansion||≥ 50 %|
|Dielectric strength *||kV/mm||≥ 5.5|
|Tensile strength||N/10 mm||≥ 35|
|Adhesiveness / Adhesion to steel||N/cm||≥ 1.6|
|Thermal class||°C||180 (H)|