SynTape® – Electrical Adhesive Tapes SynTape® B/ PR.25
SynTape® B/ PR.25 is a glass fibre reinforced polyester tape with rubber adhesive.
Besides high resistance to tears, it is also characterised by its high initial adhesiveness and good resistance to solvents.
Application
As stress relief and mechanical reinforcement as well as for masking the winding start and end.
Delivery forms
- Width: From 2.5 mm, in 0.1 mm increments
- Standard width: 50 m
- Core diameter: 76 mm (3“)
- Special widths on request
Glue
rubber
Adhesive
one-sided
Storage
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
Vous avez des questions sur nos rubans adhésifs électriques ou vous souhaitez nous envoyer une demande ?
Notre représentant des ventes se fera un plaisir de vous aider.
Technical data
| Property | Unit of measure | |
|---|---|---|
| Electrolyt. corrosion value | 1 | |
| Thermal class | 130 ° C/ B | |
| Dielectic strength | kV | 5 |
| Adhesiveness / Adhesion to steel | N/cm | 3.5 |
| Elongation at break | % | 5 |
| Tensile strength | N/cm | 380 |
| Total thickness | mm | 0.120 |
| Adhesive | Rubber | |
| Backing thickness | mm | 0.085 |
| Backing | Polyester glass filament reinforced | |
| Standard colours | white | |
| Type/ Ordering information | B/ PR.25 |