SynTape® – Electrical Adhesive Tapes SynTape® F/ PS.30
SynTape® F/ PS.30 is a glass fibre reinforced polyester adhesive tape with acrylate adhesive.
The polyester adhesive tape SynTape® F/ PS 30 has very high resistance to tears and good resistance to impregnants.
Application
As final insulation, for masking the winding start and end, for masking supply lines and as stress relief (mechanical reinforcement).
Delivery forms
- Width: From 2.5 mm, in 0.1 mm increments
- Standard length: 50 m
- Core diameter: 76 mm (3“)
- Special widths on request
Glue
acrylate
Adhesive
one-sided
Storage
6 months at room temperature. Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Punched parts, bent & formed parts
We offer a wide range of punched and formed parts: Rolls, individual parts unsorted, sorted or stacked, adhesive on one or both sides, non-adhesive, with or without a grip tab.
Vous avez des questions sur nos rubans adhésifs électriques ou vous souhaitez nous envoyer une demande ?
Notre représentant des ventes se fera un plaisir de vous aider.
Technical data
| Property | Unit of measure | |
|---|---|---|
| Electrolyt. corrosion value | 1 | |
| Thermal class | 155 °C/ F | |
| Adhesiveness / Adhesion to steel | N/cm | 6.0 |
| Dielectic strength | kV | 5 |
| Elongation at break | % | 5 |
| Tensile strength | N/cm | 550 |
| Total thickness | mm | 0.175 |
| Adhesive | Acrylate | |
| Backing thickness | mm | 0.100 |
| Backing | Glass fibre reinforced polyester film | |
| Standard colours | translucent | |
| Type/ Ordering information | F/ PS.30 |