SynTape® – Electrical Adhesive Tapes
Syntape® B/ PR.30
SynTape® B/ PR.30 is a glass fibre reinforced polyester tape with rubber adhesive.
Attributes
Besides a high resistance to tears, SynTape® B/ PR.30 is characterised by its high initial adhesiveness.
Application
As stress relief and mechanical reinforcement, as well as for masking the winding start and end.
Standards
RoHS compliant according to 2011/65/EU.
Delivery forms
Width: From 2.5 mm, in 0.1 mm increments
Standard length: 50 m
Core diameter: 76 mm (3“)
Special widths: From 0.8 mm on request!
Glue
Rubber
Adhesive
one-sided
Storage
Adhesive tapes should be stored in a cool, dry place at approx. 20 °C and 50 - 60 % relative humidity. The storage period should not exceed 6 months.
Technical data
General
| Type/ Ordering information | Standard colours | Backing | Backing thickness | Adhesive | Total thickness | Tear force | Elongation at break | Adhesiveness / Adhesion to steel | Dielectric strength | Thermal class | UL FILE NO. | Electrolyt. corrosion value |
| Unit of measure | |
|---|---|
| B/ PR.30 | |
| translucent | |
| Polyester glass filament reinforced | |
| mm | 0.100 |
| Rubber | |
| 0.175 mm | |
| N | 550 /cm |
| 5 % | |
| 4.0 N/cm | |
| 5000 Veff | |
| 130 °C/ B | |
| E 178430 | |
| 1 |
SynTape® is a registered trademark of SynFlex.