Always top-informed! Read all about the latest developments in the SynFlex Group and find the dates for events to meet us personally.
12. - 15.11.2019
Stand: B2 / 503
24. - 26. March 2020
26. - 28. May 2020
01. - 02. April 2020
hi Tech & Industry Scandinavia
SynFlex Scandinavia was represented at the hi Tech & Industry in Herning from 1 to 3 October. This fair is the largest technology and industry fair in Scandinavia and attracted a total of 718 exhibitors in 11 halls.
Individual insulating materials for your project
As a long-standing partner for insulating materials, we offer you various surface insulating materials, each tailored to your needs.
In addition to our standard products such as resilient pressboards or high-temperature resistant aramid papers, we are known for our individual multi-layer laminates from our own production.
Find out more about our possibilities and develop the right solution for you jointly with us.
SynFlex Italia presented products and services of the SynFlex Group at this year's Coiltech in Pordenone, Italy. With over 400 exhibitors and manufacturers of electric motors, generators, transformers and large transformers the fair has established itself as a meeting place for the Southern European electrical industry since 2010.
Safety and assembly convenience
Our large selection of transformer terminal blocks is tailored to the diverse specifications of transformer manufacturers. Additionally to the wide range of cross-sections and connection technologies we have practical accessories like marking systems for you.
Certification review successful
In July 2019, the DQS carried out an annual surveillance audit for the automotive standard IATF 16949 and ISO 9001 at SynFlex Elektro GmbH. The audit was evaluated positively. Thus, the effectiveness of the quality management system based on IATF 16949 and DIN EN ISO 9001 was repeatedly proven.
Not only customers from the automotive industry benefit from the certification according to IATF 16949, but all customers of the SynFlex Group as well.
From Blomberg into the world
We develop, produce and sell the parts for electrical insulation systems with well matched and tested components so that our customers can use a reliable system for their end products. And we try to look ahead to see what needs our customers will have.
The Target is clear: the customer wants to have the perfect printing result.
One of the main factors, which is unfortunately often ignored, is the cleanliness of the printing process. It is not enough to apply the ink safely to the end product. The stamp must be perfectly cleaned for the next printing process. Pad-cleaning tapes of SynFlex have exactly these properties by reliably removing residual ink and dirt.
The SynFlex Group introduces itself
If you want to shape the future, you need strong partners. SynFlex has found these partners with the companies SHWire and IsoTek, united in the SynFlex Group.
Together, we bundle our competencies in the SynFlex Group, make use of synergies and offer customers added value that is unmatched in our industry.
Successful at the Coil Winding Show
Three exciting days in Berlin lie behind us, crowned with a great evening event near the Brandenburg Gate. As usual, we were at our customers' disposal in Hall 4.2.
SHWire and SynFlex are very active in national and international standards bodies. These worldwide valid so-called IEC standards describe the state of the art regarding important tests and product properties, e.g. for winding wires in the 60317 and 60851 series of standards. Our customers can refer to these comprehensively and reliably and also agree on specific tests or properties.
Shopping for the good cause
The year is drawing to a close, the time of contemplation has come and we are presenting gifts to loved ones. But also there are many people around us who need our support. The Schwering & Hasse Foundation is committed to these people in the city of Lügde and the region. Especially the children are in the foreground.
Certification of real-life Practice
Until recently, the standard for QM systems in the automotive industry was ISO/TS 16949. It defines the additional industry-specific requirements for the production of series parts and spare parts in the automotive industry. This has been replaced by IATF 16949. SynFlex successfully completed the transition audit for IATF 16949:2016 in September 2018 and is therefore one of the first among the very few in the industry.
Chemistry can also be different
Environmental protection has long ceased to be merely an issue for the future but, despite this, very little is evident in some areas of collective efforts designed to protect the environment. We regard it as a very important task, and we also see in the enforcement of international agreements throughout our sector an opportunity to promote efforts in environmental protection beyond national frontiers.
Production secures prosperity, employment and, ultimately, the future for all of us. During times in which we see relocation to low-wage countries, the European economy asserts itself through flexibility, quality and stability. This applies in particular to the winding industry.
Growing significance of the EU railway standard
When it comes to the safety of passengers and personnel, use of the final product and individual components in railway technology involves the strictest demands along the entire manufacturing chain. The regulations in DIN EN 45545 must be observed to detect and evaluate any hazard potential at an early stage.
10 years high-bay warehouse
Smooth logistics have for many years been one of the basic demands customers make of a system provider such as SynFlex. Expressions such as just-in-time and 24-hour delivery service have now become an indispensable service which many customers no longer wish to do without.
Two jubilees, two success stories
A company jubilee is a very special event. Together, the enterprise, its employees and customers can look back on the many milestones achieved, tricky challenges and successful moments. Two very special birthdays will be celebrated at SynFlex in 2017: 10 years of SynFlex China and 20 years of SynFlex Italy. Two jubilees, and two success stories that need to be told.
SynFlex A/S’ 25th anniversary
The history of the second international subsidiary of the SynFlex Group began as a result of the acquisition of Eldra GmbH in Austria in 1993. The reason being that Eldra GmbH initially owned 50 % of the shares of company John Hjalholt A/S which had been the Danish distributor at that time.